![]() ![]() ![]() Check dependency with other software like DELL MPIO (more sensitive to hypervisor update but. Always do a full backup before firmware upgrade. Do not apply the latest firmware released 24 hours ago, be patient and wait for community feedback. You should be able to do it yourself, diskview -j, but DELL doest not allow it.Īsk support, or check DELL KB, for firmware upgrade path. Request them to provide you disk healths status of your array. Before firmware update call DELL support. Have an active maintenance contract : it seems obvious but. We have them since 3 years and we are doing our best to stay up to date with Firmware. The default is Write-back however, the array will be configured to Write-thru whenever there is a battery failure.We have 2 EQL SANs here. The mode that the Read/Write cache is currently in within the array. The size in MB of the Read/Write cache within the array. The total number of disks that have been installed in the array. The number of controller modules in the array. The number of disks allocated as spares in an array. Specifies whether there are lost blocks in the RAID array which the user may want to clear. This value is expressed as a percentage and is calculated by dividing the UsedStorage value by the TotalStorage value and then multiplying the result by 100.Īre There Lost RAID Blocks To Be Cleared? Mirroring - Indicates that a bad drive is being mirrored onto a spare drive.This means that administrator intervention is required to correct the problem. Catastrophic Loss - This may not be visible to the user since the RAID may not be able to start up.Failed - The RAID experienced a failure, possibly due to a failed drive with no spare being available.Reconstructing - A drive is being reconstructed and displaying a percentage complete value. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |